Izdelki za stroji za odrezovanje (127)

Assis.Ter. Tech Solutions offre macchine per saldatura laser ad alte prestazioni che garantiscono risultati eccezionali nelle applicazioni di giunzione dei metalli. Le nostre macchine sono progettate per precisione e velocità, rendendole adatte a una varietà di materiali e spessori. Con caratteristiche avanzate come impostazioni di potenza regolabili e processi automatizzati, le nostre macchine per saldatura laser assicurano una qualità costante in ogni saldatura. Che tu sia nel settore automobilistico, aerospaziale o delle costruzioni, le nostre soluzioni di saldatura laser ti aiuteranno a ottenere giunzioni forti e affidabili, migliorando la durata dei tuoi prodotti.

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 12 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m). Single strand:1 Ø 4÷12 mm (#3) Pulling speed:160 m/min (530 ft/min) Average power consumption:4 kWh

Automatic wire straightening machine, with rollers, for the production of cuttosize wires up to Ø 20 mm (#6). Driven by digital electric servomotors. Capacity 2 Ø 16 mm (#5) Max pulling speed 200 m/min (660 ft/min) Straighteners (horizontalsverticals) with electronic adjustment and independent position for the 2 wires Motorized wire change unit (Optional) Prestraightening Feeding Unit (Optional) Web Teleassistance Single strand:1 Ø 8÷20 mm (#6) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:200 m/min (660 ft/min) Average power consumption:30 kWh

IDEA assembles cages by means of the patented 'Schnell System' (Patented). Using three thin longitudinal wires ,which may be welded to any point of the stirrup's exterior surface IDEA cage assembling machine is able to halfassemble lattice girders of stirrups of any shape and size. The halfassembled girder is now ready to be finished off by fixing the frame carrying bars. As the stirrups have already been welded at the correct distance, the carrying bars may be only tied every 5 or 6 stirrups. This means saving up to 60% on assembling costs; maximum flexibility girders may be assembled with stirrups of any shape and size; besides this system avoids all size restrictions and material waste involved with the use of electrowelded mesh; high quality standards the girders obtained with this system are far more precise and stiff than their traditional counterparts and they do not face any risk during transport. Minimum stirrup:150x150 mm (6"x6") Maximum stirrup:1500x1500 mm (5'x5') Wire Ø:6÷16 mm (#3÷#5) Pulling Speed:45 m/min (150 ft/min) Average power consumption:8 kWh

Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 14 mm (#4). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 150 m/min (500 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Disk bending unit Cutting with Brushless motors Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Processed wire type:Coil Single strand:1 Ø 6÷14 mm (#4) Double strand:2 Ø 6÷10 mm (#3) Pulling speed:150 m/min (500 ft/min) Bending speed:2345°/sec Average power consumption:4 kWh

The rotor type wire straightening machine RI 6 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 2,5mm to Ø 6mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Coil Straightening capacity:1 Ø 8÷22 mm (#7) Bending capacity:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 32 mm (#10). Driven by digital electric servomotors. Bar Wiser 32 bar shaping machine are equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Processed wire type:Bar Single strand:1 Ø 10÷32 mm (#10) Double strand:2 Ø 10÷22 mm (#7) Pulling speed:180 m/min (600 ft/min) Bending speed:450°/sec Average power consumption:3 kWh

Corpo per testa di fresatura 450 x 450 x 600 ricavato da fusione in ghisa sferoidale e completamente lavorato su tornio SAFOP e fresatrica SACHMAN

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM Plate revolving speed:9 rpm Installed power:1.5 kW Machine's weight:290 kg (640 lb) Machine dimensions:76x81x86(h)cm (30"x32"x34"h)

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Bar Single strand:1 Ø 8÷25 mm (#8) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Automatic rebar bending machine for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging 2 adjustable bending speeds Bending speed:35-40°/sec Average power consumption:1.5 kWh

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Bar Wiser 28 Pack 0 Storage rack pneumatically operated. Processed wire type:Bar Single strand:1 Ø 8÷28 mm (#8) Double strand:2 Ø 8÷20 mm (#6) Pulling speed:180 m/min (600 ft/min) Bending speed:574°/sec Average power consumption:3 kWh

Automatic bar bending machine for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. Automatic system for bars feeding and discharging. Bending speed:35-54°/sec Average power consumption:1 kWh

Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min); Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick; Disk bending unit; Cutting with Brushless motors; Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades; Web Teleassistance. The 'bridge' version (Opera 16 Bridge) is suitable for accepting an optional mobile carriage which allows collecting and classifying the manufactured stirrups and rebars. Processed wire type:Coil Single strand:1 Ø 6÷16 mm (#5) Double strand:2 Ø 6÷13 mm (#4) Pulling speed:140 m/min (460 ft/min) Bending speed:1900°/sec Average power consumption:9 kWh

Corpo per macchina di estrusione settore ceramico 1100 x 800 x 600 in Fe 510 saldata e lavorata

Dualdirection bar bending machine with threespeeds selfbraking motor driven by inverter. The machine doesn't pull the bars during bending operations. The equipment is driven by a selfbraking motor. Electronic digital programmer mod. 'KS31' which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 50 different shapes. Plate revolving speed:5-7,5-10 Installed power:5,5 kW Machine's weight:815 kg (1800 lb) Machine dimensions:157x110x108(h)cm (62"x43"x42"h)

Automatic steel ring bending machine for the production of circles, spirals and radius bars for diameters from Ø 6 mm (#3) to Ø 40 mm (#14). The machine uses a system of 4 rollers, one of which is specifically to ensure the stability and consistency of the radius of the curve. The rebar combined machine CER40 can be programmed to produce automatically up to 5 different radius curves on the same bar thanks to the measuring system. Bending capacity:6÷40 mm (#3÷#14) Min bending radius:25 cm (10") Plate revolving speed:13-42 rpm Installed power:7.8 kW Machine's weight:780 kg (1700 lb) Machine dimensions:138x82x95(h)cm (55"x32"x37"h)

Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins. It is equipped with Reinforced framework; Bending pin holder; Adjustable mobile bending bar (minimum length 70 mm); 'KS31' electronic digital programmer which allows adjusting bending angles. Max. Mesh length:4 m (13') Working capacity:20 Ø 12 mm (#4)

Stirrup bender and bar shaping machine from coil with 2 bending heads, allows to produce stirrups and shaped wires with bends at both ends using wires up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 160 m/min (525 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit Automatic motorized wire change Automatic adjustable wireguide Web Teleassistance Prestraightening Feeding Unit (Optional). Processed wire type:Coil Single strand:1 Ø 10÷25 mm (#8) Double strand:2 Ø 10÷20 mm (#6) Pulling speed:160 m/min (525 ft/min) Bending speed:585°/sec Average power consumption:10 kWh

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 8 mm (0.315 in.). Driven by digital electric servomotors. Max pulling speed 160 m/min (525 ft/min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Fixed cut with automatic backstop length for a maximum cutting flexibility (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m). Single strand:1 Ø 3÷8 mm (0.315 in.) Pulling speed:160 m/min (530 ft/min) Average power consumption:4 kWh

The rotor type wire straightening machine RI 12 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 4mm to Ø 12mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 12/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

Ring bending machine for rings of unlimited radius (rib rings) and spirals. Driven by a variablespeed electric motor min 20; max 30 rpm. Adjustable bending radius from a minimum 15 cm (with small diameters) and over. For Ø 6 mm (#3) Ø 32 mm (#10) wires. Bending capacity:6÷32 mm (#3÷#10) Plate revolving speed:20-30 rpm Installed power:1.8 kW Machine's weight:320 kg (705 lb) Machine dimensions:80x70x94(h)cm (31"x28"x37"h)

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. Also available HS version machine. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) HS Version 200 m/min (660 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance 3D version for the production of tridimensional pieces. Processed wire type:Coil Single strand:1 Ø 6÷16 mm (#5) Double strand:2 Ø 6÷13 mm (#4) Pulling speed:140 m/min (460 ft/min) Bending speed:1680°/sec Average power consumption:5 kWh

Four speed dualdirection bar bending machine. It doesn't pull the bars during bending operations. Driven by digital electric servomotors. Industrial PC equipped with touch screen graphic display 8'', which allows Programming stirrups and shapes with up to 30 bends; Adjusting bending angles; Storing up to 100 different shapes. Plate revolving speed:12 rpm Installed power:14 kW Machine's weight:1250 kg (2760 lb) Machine dimensions:157x104x87(h)cm (62"x41"x34"h)

The rotor type wire straightening machine RI 8 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 3mm to Ø 8mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market. Available versions RI 8/ML The manual setting of the mechanical lengthstop will enable processing wires with a bar length accuracy of ±0,1 mm. This newly designed contactless lengthstop enables to action the cut without the conventional

Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 20 mm (#6). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 140 m/min (460 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick AntiTwist electronic device (Optional) Patented feed unit that allows independent advancement for single o double wire (Optional) 2 bending unit (upper and lower) Pulling with 4 motors and 4 pulling drive wheels Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Prestraightening Feeding Unit (Optional) Automatic motorized wire change (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Coil Single strand:1 Ø 8÷20 mm (#6) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:140 m/min (460 ft/min) Bending speed:840°/sec Average power consumption:8 kWh

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 36 mm (#11) Plate revolving speed 8 RPM Plate revolving speed:8 rpm Installed power:2.2 kW Machine's weight:387 kg (850 lb) Machine dimensions:80x89x86(h)cm (31"x35"x34"h)

Multirotor wire straightening machine using coils up to Ø 20mm for the production of straight bars. 4 wheel drive pulling unit driven by servomotors for high speed production; Maximum pulling speed 140 m/min; The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; Servomotor driven cutting unit guarantees high speed and high cutting accuracy; Twin Version (Optional) with double cutter, double channel, double pulling unit it allows the processing of two bars simultaneously, doubling the productivity of the machine. Lista Bar wire straightening and cutting machine can be equipped with Bundle aligning device on the ground with vibrators (Optional); Indexing carriage for the automatic collection and sorting of the bars produced (Optional); Storage rack pneumatically operated (Optional). Single strand:1 Ø 6÷20 mm (#6) Pulling speed:140 m/min (460 ft/min) Average power consumption:15 kWh

Mesh welding machine for the production of electrowelded mesh fed by wires. The automatic wire mesh welding machine can manufacture electrowelded mesh from prestraightened wire, both longitudinal and transversal. The mesh maximum width is equal to 1250 mm, the length is variable between 2000 mm and 6000 mm. These electrowelded mesh are used for the production of prefabricated sandwich panels.